JXS automatic correction balance system
1. JP821 automatic correction balancing device
JP821 Automatic calibration balancing device order instructions
| Product code | Dia. | Length | Connection method | Quantity/per group | Unit | Quantity |
| JP821 | Ø133 | 465 | Z | 3 | sets | |
| Item | code | parameter | unit | note |
| connection method | Z OR J | | (Z=frame J=Hinged) | |
| Roller diameter | D | | mm | |
| Roller length | L | | mm | |
| Roller shaft length | L3 | | mm | |
| Roller shaft groove width | M | | mm | |
| Distance from idler shaft groove to shaft head | N | | mm | If the shaft head is milling flat, then N=0 |
| Roller shaft groove thickness | b | | mm | |
| Shaft diameter | d | | mm | |
It is a new patented product made of special materials. The rollers in both volumes are conical spiral rollers with different right and left lateral directions. When the belt is running, the idlers on both sides give the belt a transverse force pointing to the center. When the belt is running off-track, the belt slides to one side and is pushed outwards by the spiral Angle towards the center of the belt. In this way, the belt can return to the center for normal operation.
2. AP821 multifunctional centerline tracking device
The AP821 roller body rotates around the axis and can swing back and forth. When the belt running center and the roller center deviate from each other, the roller body rotates and swings back and forth at the same time, which drives the belt back to the center line and corrects the belt deviation.
3. Strong ability to correct deviation
①The spiral structure realizes active deviation correction and prevention of deviation of the conveyor belt during operation.
②Milky groove design realizes no adhesion of materials during operation and facilitates drainage.
③Concave arc shape achieves full fit with the conveyor belt, increases the effective area, and ensures the effect of correcting the deviation.
4. Easy to install and maintain
5. Long service life
① High-performance surface wrapping material Akron wears only 0.08, excellent wear resistance.
② The patented design of the triple seal achieves zero penetration and guarantees a long service life.
③ CNC coaxial double-end machining achieves high coaxiality, so that it runs zero during operation without noise.
6. Protect belts to reduce operating costs
Shore hardness is 80A lower than the belt hardness to ensure that the conveyor belt does not wear.
- Unsolvable problem on site
- Active correction and prevention of deviation
① No personnel need to be adjusted on the operation site to save human resources.
② Eliminate the hidden security risks caused by man-machine contact of operating equipment.
③ Meet the requirement of unattended belt conveyor.
- More than 1,000 companies in various industries have been applied
Steel, metallurgy, coal, thermal power plant, building materials, port, cement, mine, grain, etc.
|
|
Carrier Idler of Thermal Power Plant Intelligent Deviation Correction System Images
|
